Technical information
DANFOSS MEDIUM-SPEED MOTOR
- Technology: OMT
- Flange: 4-hole, 113.4 x 113.4mm, Ø centring 123.8mm
- Shaft: PTO 6-tooth splined Ø 1"3/8
- Ports: 3/4" BSP (input and outlet) 1/4" BSP (drain)
Danfoss part No 151B3019
- Technology: OMT
- Flange: 4-hole, 113.4 x 113.4mm, Ø centring 123.8mm
- Shaft: PTO 6-tooth splined Ø 1"3/8
- Ports: 3/4" BSP (input and outlet) 1/4" BSP (drain)
Danfoss part No 151B3019
These motors are perfect for long periods of operation under tough conditions (e.g. high pressure, slow speed, very light oils, frequent switches). The tapered roller bearings allows the absorption of static and dynamic radial loads. The distribution disc with a balancing plate is driven by a separated cardan shaft and it minimises the hydraulic and mechanical losses. As a result, the efficiency is considerable even under high pressures.
Ports 3/4" BSP
PTO shaft 1’’3/8
Max continuous inlet pressure 210 bar
|
Speed (rpm) |
Torque (Nm) |
||||||||
|
Displacement (cm³) |
max continuous |
min |
max continuous |
start min |
max continuous power (kW) |
max continuous drop of pressure (bar) |
max continuous oil flow (l/mn) |
Sauer danfoss reference |
Hydrokit reference |
|
161,1 |
625 |
10 |
470 |
340 |
26,5 |
200 |
100 |
151B3000 |
MHT160A5 |
|
201,4 |
625 |
9 |
590 |
430 |
33,5 |
200 |
125 |
151B3001 |
MHT200A5 |
|
251,8 |
500 |
8 |
730 |
530 |
33,5 |
200 |
125 |
151B3002 |
MHT250A5 |
|
326,3 |
380 |
7 |
950 |
740 |
33,5 |
200 |
125 |
151B3003 |
MHT315A5 |
|
410,9 |
305 |
6 |
1080 |
840 |
30 |
180 |
125 |
151B3004 |
MHT400A5 |
|
532,6 |
240 |
5 |
1220 |
950 |
26,5 |
160 |
125 |
151B3005 |
MHT500A5 |
|
161,1 |
625 |
10 |
470 |
340 |
26,5 |
200 |
100 |
151B3018 |
MHT160C4 |
|
201,4 |
625 |
9 |
590 |
430 |
33,5 |
200 |
125 |
151B3019 |
MHT200C4 |
Technical data
| Motor type | OMT |  |
|
| Displacement | 200 | cc/rev | |
| Flange type | Flasque 4 trous - centrage Ø125mm |  |
|
| Shaft type | Splined |  |
|
| Size of the shaft | 6 dents PTO Ø34.85 | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G3/4 | ||
| Taille du drain | G1/4 | ||
| Bearing type | Roulement à rouleaux conique | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | Danfoss |  |