Technical information
OMPX 200cc
SAE 6B shaft - 6 teeth
with Anti-Shock block Flask calibrated 100 bar (ref 158F0435)
G1/2 port
Danfoss ref of the set: 11185913 (paint version: 11185913) (replaces ref 158F8001)
Set used on all Liebherr brand grapples (1 or 2 motors depending on the model)
SAE 6B shaft - 6 teeth
with Anti-Shock block Flask calibrated 100 bar (ref 158F0435)
G1/2 port
Danfoss ref of the set: 11185913 (paint version: 11185913) (replaces ref 158F8001)
Set used on all Liebherr brand grapples (1 or 2 motors depending on the model)
Technical data
| Motor type | OMP Gerotor |  |
|
| Displacement | 200 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Splined |  |
|
| Size of the shaft | 6 dents PTO SAE6B Ø25.4 | ||
| Orifices position | Side port - Aligned |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |