ELEC. CONTROLLED PROP. FLOW DIVIDER 12VDC 90LPM REG. 50LPM
Hydrokit Part Number : DDP90501H1
Discontinued product replaced by :
PROP FLOW DIVIDER 3 PORT 12V ( DDPA0501D1 )
Technical information
ELECTRICALLY-CONTROLLED PROPORTIONAL FLOW DIVIDER
Without check valve
- PWM electrical control
- Max. flow rate at inlet: 90lpm
- Controlled flow rate: 0 to 50lpm
- Pressure: 210bar
- Mounting: 1/2" BSP
- Power supply: 12Vdc
Without check valve
- PWM electrical control
- Max. flow rate at inlet: 90lpm
- Controlled flow rate: 0 to 50lpm
- Pressure: 210bar
- Mounting: 1/2" BSP
- Power supply: 12Vdc
Electrically controlled flow divider
The flow divider divides the inlet flow in a priority and constant flow manually adjustable, and in a residual flow. - The residual flow can be pressurized and sent to a second receiver. - Identical operating principle. - PWM electrical control.
3-way divider with pressure balance.
- Pressure : 350 bar, maximum flow : 150 l/min.
Electrically controlled flow divider
- Maximum pressure : 210 bar.
Control |
Inlet flow (l/min) |
Regulated flow (l/min) |
Pressure (bar) |
Implantation |
Voltage (VDC) |
Reference without valve |
Reference with valve |
Manual |
90 |
0 to 50 |
350 |
1/2 |
- |
DDR9050MH1 |
DDR9050MH2 |
150 |
0 to 90 |
350 |
1/2 |
- |
DDRA590MH1 |
- | |
Electrical 12 V |
90 |
0 to 50 |
210 |
1/2 |
12 |
DDP90501H1 |
DDP90501H2 |
150 |
0 to 90 |
210 |
3/4 |
12 |
DDPA5901H1 |
- | |
Electrical 24V |
90 |
0 to 50 |
210 |
1/2 |
24 |
DDP90502H1 |
DDP90502H2 |
150 |
0 to 90 |
210 |
3/4 |
24 |
DDPA5902H1 |
- |
Technical data
Voltage | 12 VCC | Volt | |
Débit maxi | 90 | l/min | |
Type of flow regulation | Proportionnelle PWM 0 - 50 L/min | ||
Max working pressure | 315 | bar | |
Limiteur de pression | Non | ||
Implantation orifice P | G1/2 | ||
Implantation orifices A&B et/ou R | G1/2 | ||
Connector type | Pinch Hirschmann DIN 43650 | ||
Option | Without option | ||
Boîtier Électrique | Avec |