ELEC. CONTROLLED PROP. FLOW DIVIDER 24VDC 90LPM REG. 50LPM
Hydrokit Part Number : DDP90502H1
Discontinued product replaced by :
KIT DIVISEUR DEBIT PROP 3 VOIES 24V ( DDPA0502D1 )
Technical information
ELECTRICALLY-CONTROLLED PROPORTIONAL FLOW DIVIDER
Without check valve
- PWM electrical control
- Max. flow rate at inlet: 90lpm
- Controlled flow rate: 0 to 50lpm
- Pressure: 210bar
- Mounting: 1/2" BSP
- Power supply: 24Vdc
Without check valve
- PWM electrical control
- Max. flow rate at inlet: 90lpm
- Controlled flow rate: 0 to 50lpm
- Pressure: 210bar
- Mounting: 1/2" BSP
- Power supply: 24Vdc
Electrically controlled flow divider The flow divider divides the inlet flow in a priority and constant flow manually adjustable, and in a residual flow. - The residual flow can be pressurized and sent to a second receiver. - Identical operating principle. - PWM electrical control.
3-way divider with pressure balance.
- Pressure : 350 bar, maximum flow : 150 l/min.
Electrically controlled flow divider
- Maximum pressure : 210 bar.
Control | Inlet flow (l/min) | Regulated flow (l/min) | Pressure (bar) | Implantation | Voltage (VDC) | Reference without valve | Reference with valve |
Manual | 90 | 0 to 50 | 350 | 1/2 | - | DDR9050MH1 | DDR9050MH2 |
150 | 0 to 90 | 350 | 1/2 | - | DDRA590MH1 | - | |
Electrical 12 V | 90 | 0 to 50 | 210 | 1/2 | 12 | DDP90501H1 | DDP90501H2 |
150 | 0 to 90 | 210 | 3/4 | 12 | DDPA5901H1 | - | |
Electrical 24V | 90 | 0 to 50 | 210 | 1/2 | 24 | DDP90502H1 | DDP90502H2 |
150 | 0 to 90 | 210 | 3/4 | 24 | DDPA5902H1 | - |
Technical data
Voltage | 24 VCC | Volt | |
Débit maxi | 90 | l/min | |
Type of flow regulation | Proportionnelle PWM 0 - 50 L/min | ||
Max working pressure | 315 | bar | |
Limiteur de pression | Non | ||
Implantation orifice P | G1/2 | ||
Implantation orifices A&B et/ou R | G1/2 | ||
Connector type | Pinch Hirschmann DIN 43650 | ||
Option | Without option | ||
Boîtier Électrique | Avec |