MOTORISED FLOW DIVIDER 12-24VDC 65 REG. 50LPM
Hydrokit Part Number : DD6550K12B
Technical information
MOTORISED FLOW DIVIDER
- Supplied with control box
- Max. flow rate: 65lpm
- Controlled flow rate: 1 to 50lpm
- Power supply: 12-24V DC
- Pressure: 5 to 315bar
- Mountings: 1/2" BSP (A, B) 3/4" BSP (P)
- Supplied with control box
- Max. flow rate: 65lpm
- Controlled flow rate: 1 to 50lpm
- Power supply: 12-24V DC
- Pressure: 5 to 315bar
- Mountings: 1/2" BSP (A, B) 3/4" BSP (P)
Applications: - Variable flow rate control depending upon the position of the dial. Precise adjustment. - The pressure of the inlet flow is established according to the receiver with the greatest load. - Flow divider and control box supplied pre-wired. Specifications: - 12 or 24Vdc supply. - Fuse protection. - Integrated check valve. - Nominal flow rate: 65lpm - temperature -20 to 80°C. - Control pressure +/- 5% - Pressure loss: 3.5bar - Grear motor speed: 9rpm - Adjusted flow rate: 0-12lpm, 0-25lpm, 0-50lpm.
JJM
P = pump
A = Prioritary flow
B = Residual flow
Technical data
Voltage | 12 VCC | Volt | |
Débit maxi | 65 | l/min | |
Type of flow regulation | Electrique 0 - 50 L/min | ||
Max working pressure | 350 | bar | |
Limiteur de pression | Non | ||
Implantation orifice P | G3/4 | ||
Implantation orifices A&B et/ou R | G1/2 | ||
Connector type | Pinch Hirschmann DIN 43650 | ||
Option | Without option | ||
Boîtier Électrique | Avec |