HYDROKIT MEDIUM SPEED MOTOR 250CC
Hydrokit Part Number : MHP250A1AF
Discontinued product replaced by :
Motor WP 250cc shaft Ø25mm ( MHP250A1AW )
Technical information
HYDROKIT MEDIUM SPEED MOTOR 250CC (247.5cm3)
SAE A front flange 82.55mm alignment 106.4mm centre distance
Cylindrical shaft Ø25mm, parallel key A8x7x32
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
SAE A front flange 82.55mm alignment 106.4mm centre distance
Cylindrical shaft Ø25mm, parallel key A8x7x32
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Technical data
Motor type | MP (M+S) | ||
Displacement | 250 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | M+S |