DANFOSS OMP MEDIUM-SPEED MOTOR
Hydrokit Part Number : MHP160A1AD8
Discontinued product replaced by :
MOTEUR OMPX 160CC CYL Ø25MM ( MHP160A1AX8 )
Technical information
DANFOSS OMP MEDIUM-SPEED MOTOR
- Displacement: 155.7cc
- Front flange: 2-hole, SAE A Ø82.55mm centring, 106.4mm centre distance
- Shaft: Ø25mm cylindrical, parallel key A8x7x32
- Ports: 1/2" BSP (A & B) rear output
- Geniune Danfoss reference: 151-5195
- Displacement: 155.7cc
- Front flange: 2-hole, SAE A Ø82.55mm centring, 106.4mm centre distance
- Shaft: Ø25mm cylindrical, parallel key A8x7x32
- Ports: 1/2" BSP (A & B) rear output
- Geniune Danfoss reference: 151-5195
Technical data
| Motor type | OMP Gerotor |  |
|
| Displacement | 160 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | End port |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |