Engine OMP 250 Danfoss 151-5197 - s
Hydrokit Part Number : MHP250A1AD8
Discontinued product replaced by :
MOTEUR OMPX 250CC CYL Ø25MM ( MHP250A1AX8 )
Technical information
cylindrical shaft Ø25 mm Flange Sae
A 2 bolt - centring 82.5 mm Rear ports
1/2 BSP ref Danfoss 151-5197
A 2 bolt - centring 82.5 mm Rear ports
1/2 BSP ref Danfoss 151-5197
Technical data
Motor type | OMP Gerotor | ||
Displacement | 250 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | End port | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |