Engine OMP 100 Danfoss 151-5193 - s
Hydrokit Part Number : MHP100A1AD8
Discontinued product replaced by :
MOTEUR OMPX 100CC CYL Ø25MM ( MHP100A1AX8 )
Technical information
cylindrical shaft Ø25 mm Flange Sae
A 2 bolt - centring 82.5 mm Rear ports
BSP1/2 ref Danfoss 151-5193
A 2 bolt - centring 82.5 mm Rear ports
BSP1/2 ref Danfoss 151-5193
Technical data
| Motor type | OMP Gerotor |  |
|
| Displacement | 100 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | End port |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |