HYDRAULIC MOTOR 50 CM3 SHAFT=2
Hydrokit Part Number : MHP050A1AD
Discontinued product replaced by :
HYD MOTOR 50 CM3 SHAFT Ø25 MM ( MHP050A1AX )
Technical information
HYDRAULIC MOTOR 50 CM3 SHAFT=25MM
This kind of engine is compact with a classic gear rim. It is suitable for long periods of operation under moderated pressure or intermittent periods of operation under high pressure.
Speed : max 150 to 1600 RPM according to the engine
Cubic capacity : 25 to 400 cm³/rev
Speed (rpm) |
Torque (Nm) |
||||||||
Displacement (cm³) |
max continuous |
min |
max continuous |
start min |
max continuous power (kW) |
max continuous pressure drop (bar) |
max continuous oil flow (l/mn) |
Sauer Danfoss reference |
Hydrokit reference |
25 |
1600 |
20 |
33 |
30 |
4,5 |
100 |
40 |
151.0640 |
MHP025A1AD |
32 |
1560 |
15 |
43 |
40 |
5,8 |
100 |
50 |
151.0641 |
MHP032A1AD |
40 |
1500 |
10 |
52 |
45 |
7 |
100 |
60 |
151.0642 |
MHP040A1AD |
48,6 |
1230 |
10 |
93 |
80 |
10 |
140 |
60 |
151.0610 |
MHP050A1AD |
77,8 |
770 |
10 |
150 |
135 |
10 |
140 |
60 |
151.0611 |
MHP080A1AD |
97,3 |
615 |
9 |
190 |
170 |
11 |
140 |
60 |
151.0612 |
MHP100A1AD |
125 |
480 |
9 |
240 |
210 |
10 |
140 |
60 |
151.0613 |
MHP125A1AD |
155,7 |
385 |
8 |
300 |
280 |
10 |
140 |
60 |
151.0614 |
MHP160A1AD |
194,6 |
310 |
7 |
300 |
270 |
8 |
115 |
60 |
151.0615 |
MHP200A1AD |
242,3 |
250 |
5 |
300 |
280 |
6 |
90 |
60 |
151.0616 |
MHP250A1AD |
306,1 |
195 |
5 |
300 |
280 |
5 |
75 |
60 |
151.0617 |
MHP315A1AD |
389,2 |
155 |
5 |
300 |
280 |
4 |
60 |
60 |
151.0618 |
MHP400A1AD |
Technical data
Motor type | OMP Gerotor | ||
Displacement | 50 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |