MEDIUM SPEED ENGINE 315CM³
Hydrokit Part Number : MHP315A1AD
Discontinued product replaced by :
OMP X 315 MOTOR SHAFT CYL Ø25MM ( MHP315A1AX )
Technical information
DANFOSS OMP MEDIUM-SPEED MOTOR
- Displacemet: 306.1cc
- Shaft: Ø25mm, cylindrical
- Flange: 2-hole, SAE A, Ø82.5mm centring
- Ports: 1/2" BSP and 1/4" BSP (drain
- Genuine Danfoss reference: 151-0617
- Displacemet: 306.1cc
- Shaft: Ø25mm, cylindrical
- Flange: 2-hole, SAE A, Ø82.5mm centring
- Ports: 1/2" BSP and 1/4" BSP (drain
- Genuine Danfoss reference: 151-0617
This kind of engine is compact with a classic gear rim. It is suitable for long periods of operation under moderated pressure or intermittent periods of operation under high pressure.
Speed : max 150 to 1600 RPM according to the engine
Cubic capacity : 25 to 400 cm³/rev
Speed (rpm) | Torque (Nm) | ||||||||
Displacement (cm³) | max continuous | min | max continuous | start min | max continuous power (kW) | max continuous pressure drop (bar) | max continuous oil flow (l/mn) | Sauer Danfoss reference | Hydrokit reference |
25 | 1600 | 20 | 33 | 30 | 4,5 | 100 | 40 | 151.0640 | MHP025A1AD |
32 | 1560 | 15 | 43 | 40 | 5,8 | 100 | 50 | 151.0641 | MHP032A1AD |
40 | 1500 | 10 | 52 | 45 | 7 | 100 | 60 | 151.0642 | MHP040A1AD |
48,6 | 1230 | 10 | 93 | 80 | 10 | 140 | 60 | 151.0610 | MHP050A1AD |
77,8 | 770 | 10 | 150 | 135 | 10 | 140 | 60 | 151.0611 | MHP080A1AD |
97,3 | 615 | 9 | 190 | 170 | 11 | 140 | 60 | 151.0612 | MHP100A1AD |
125 | 480 | 9 | 240 | 210 | 10 | 140 | 60 | 151.0613 | MHP125A1AD |
155,7 | 385 | 8 | 300 | 280 | 10 | 140 | 60 | 151.0614 | MHP160A1AD |
194,6 | 310 | 7 | 300 | 270 | 8 | 115 | 60 | 151.0615 | MHP200A1AD |
242,3 | 250 | 5 | 300 | 280 | 6 | 90 | 60 | 151.0616 | MHP250A1AD |
306,1 | 195 | 5 | 300 | 280 | 5 | 75 | 60 | 151.0617 | MHP315A1AD |
389,2 | 155 | 5 | 300 | 280 | 4 | 60 | 60 | 151.0618 | MHP400A1AD |
Technical data
Motor type | OMP Gerotor | ||
Displacement | 315 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |