HYDR. MEDIUM SPEED MOTOR 125CC
Hydrokit Part Number : MHP125C1AD
Discontinued product replaced by :
MOTEUR OMPX 125CC 6DENTS SAE6B ( MHP125ACAX )
Technical information
HYDRAULIC MEDIUM SPEED MOTOR 125CC
SAE A front flange 82.55mm alignment 106.4mm centre distance
Splined shaft Ø25.3mm, straight-sided teeth, centring at base of teeth (SAE 6 B)
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Geniune Danfoss reference: 151-0633
SAE A front flange 82.55mm alignment 106.4mm centre distance
Splined shaft Ø25.3mm, straight-sided teeth, centring at base of teeth (SAE 6 B)
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Geniune Danfoss reference: 151-0633
Technical data
Motor type | OMP Gerotor | ||
Displacement | 125 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Splined | ||
Size of the shaft | 6 dents PTO SAE6B Ø25.4 | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |