EATON MEDIUM-SPEED MOTOR
Hydrokit Part Number : MHP160A1AE
Discontinued product replaced by :
Motor WP 160cc shaft Ø25mm ( MHP160A1AW )
Technical information
EATON MEDIUM-SPEED MOTOR
- Displacement: 158cc
- Front flange: 2-hole, SAE A Ø82.55mm centring, 106.4mm centre distance
- Shaft: Ø25mm cylindrical
- Ports: 1/2" BSP (A & B) 1/4" BSP (T)
- Reinforced shaft seal, painted in black
- Geniune Eaton reference: 016-0198-002
- Displacement: 158cc
- Front flange: 2-hole, SAE A Ø82.55mm centring, 106.4mm centre distance
- Shaft: Ø25mm cylindrical
- Ports: 1/2" BSP (A & B) 1/4" BSP (T)
- Reinforced shaft seal, painted in black
- Geniune Eaton reference: 016-0198-002
Technical data
Motor type | OMP Gerotor | ||
Displacement | 160 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Black RAL 9005 | ||
Marque | Danfoss (ex Eaton Charlynn) |