HYDR MEDIUM SPEED MOTOR 250CC
Hydrokit Part Number : MHR245A1AE
Discontinued product replaced by :
Motor WR 250cc shaft Ø25mm ( MHR250A1AW )
Technical information
Hydraulic medium speed motor 250cc (243 cm3)
SAE A front flange. 82.55mm alignment 106.4mm centre distance.
Cylindrical shaft 25mm dia. Reinforced shaft seal. Parallel key A8x7x32.
Ports 1/2" BSP (A & B) 1/4" (T)
Painted black.
SAE A front flange. 82.55mm alignment 106.4mm centre distance.
Cylindrical shaft 25mm dia. Reinforced shaft seal. Parallel key A8x7x32.
Ports 1/2" BSP (A & B) 1/4" (T)
Painted black.
Technical data
Motor type | OMR Geroller | ||
Displacement | 245 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Black RAL 9005 | ||
Marque | Danfoss (ex Eaton Charlynn) |