Technical information
HYDRAULIC MEDIUM SPEED MOTOR 80CC (80.5cm3)
Cylindrical shaft Ø32mm, parallel key A10x8x45
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Max. pressure: 230bar (inlet), 140bar (outlet)
Geniune Danfoss reference: 151F0500
Cylindrical shaft Ø32mm, parallel key A10x8x45
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Max. pressure: 230bar (inlet), 140bar (outlet)
Geniune Danfoss reference: 151F0500
Technical data
Motor type | WS | ||
Displacement | 80 | cc/rev | |
Flange type | Flasque 4 trous - centrage Ø82.5mm | ||
Shaft type | Cylindrical | ||
Size of the shaft | 32 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Bearing type | Roulement à rouleaux conique | ||
Speed sensor | No | ||
Paint | Black RAL 9005 | ||
Marque | Impro Fluidtek |