Hydrokit

MEDIUM SPEED ENGINE 160CM³

Hydrokit Part Number : MHS160A3AD  

Technical information

DANFOSS MEDIUM-SPEED MOTOR
- Displacement: 159.7cc
- Front flange: SAE, Ø82.55mm alignment, 106.4mm centre distance
- Shaft: Ø32mm cylindrical, parallel key A10x8x45 DIN6885
- Ports: 1/2" BSP (A & B) 1/4" BSP (T)
- Max. Pressure: 230 (inlet) 140bar (outlet)
- Geniune Danfoss reference: 151F0503

These engines are perfect for long periods of operation under tough conditions (e.g. high pressure, slow speed, very light oils, frequent switches) The tapered roller bearings allows the absorption of static and dynamic radial loads. The distribution disc with a balancing plate is drived by a separated cardan shaft and it minimizes the hydraulic and mechanical losses. As a result, the efficiency is considerable even under high pressures.
Speed : max 600 to 810 RPM according to the engine
Cubic capacity : 80 to 400 cm³/rev
Ports 1/2 BSP
Shaft diameter 32 mm

 

Plan technique
Plan technique

Technical data

Motor type OMS
Displacement 160 cc/rev
Flange type Flasque 4 trous - centrage Ø82.5mm
Shaft type Cylindrical
Size of the shaft 32 mm
Orifices position Side port - Offset
Orifices A & B size G1/2
Taille du drain G1/4
Bearing type Roulement à rouleaux conique
Speed sensor No
Paint Not paint
Marque Danfoss / White WDMS