HYDR. MEDIUM SPEED MOTOR 200CC
Hydrokit Part Number : MHS200A3F
Technical information
HYDRAULIC MEDIUM SPEED MOTOR 200CC (159.6cm3)
SAE front flange 82.55mm alignment 106.4mm centre distance
Cylindrical shaft Ø25mm, parallel key A8x7x32
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Reinforced seal shaft 150bar
SAE front flange 82.55mm alignment 106.4mm centre distance
Cylindrical shaft Ø25mm, parallel key A8x7x32
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Reinforced seal shaft 150bar
Technical data
| Motor type | MS (M+S) |  |
|
| Displacement | 200 | cc/rev | |
| Flange type | Flasque 4 trous - centrage Ø82.5mm |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 32 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Bearing type | Roulement à rouleaux conique | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | M+S |  |