HYDRAULIC MEDIUM-SPEED MOTOR
Hydrokit Part Number : MHS160A3F
Technical information
HYDRAULIC MEDIUM-SPEED MOTOR
- Displacement: 160cc
- Front flange: SAE, Ø82.55mm alignment, 106.4mm centre distance
- Shaft: Ø32mm cylindrical, parallel key A10x8x45 DIN6885
- Ports: 1/2" BSP (A & B), 1/4" BSP (T)
- Reinforced seal shaft: 150bar
- Displacement: 160cc
- Front flange: SAE, Ø82.55mm alignment, 106.4mm centre distance
- Shaft: Ø32mm cylindrical, parallel key A10x8x45 DIN6885
- Ports: 1/2" BSP (A & B), 1/4" BSP (T)
- Reinforced seal shaft: 150bar
Technical data
| Motor type | MS (M+S) |  |
|
| Displacement | 160 | cc/rev | |
| Flange type | Flasque 4 trous - centrage Ø82.5mm |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 32 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Bearing type | Roulement à rouleaux conique | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | M+S |  |