Technical information
DANFOSS OMSS MEDIUM-SPEED MOTOR
- Displacement: 250.0cc
- Shaft: 12-tooth splined, 27.6mm
- Flange: 4-hole Ø125mm, Ø99.9mm centring
- Ports: 1/2" BSP (side) - 1/4" BSP (drain)
- Danfoss part no.: 151F0540
- Displacement: 250.0cc
- Shaft: 12-tooth splined, 27.6mm
- Flange: 4-hole Ø125mm, Ø99.9mm centring
- Ports: 1/2" BSP (side) - 1/4" BSP (drain)
- Danfoss part no.: 151F0540
Technical data
Motor type | OMSS | ||
Displacement | 250 | cc/rev | |
Shaft type | Splined | ||
Size of the shaft | 12 dents 12/24 | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Bearing type | Sans roulement - Bearingless | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |