MEDIUM SPEED ENGINE 500CM³
Hydrokit Part Number : MHT500A5
Technical information
DANFOSS MEDIUM-SPEED MOTOR
- Displacement: 532.6cc
- Shaft: Cylindrical shaft Ø40mm, parallel key A12x8x70 according to DIN 6885
- Flange: 4-hole 160.4 x 160.4 mm, Ø125 centring
- Ports: 3/4" BSP
- Genuine Danfoss reference: 151B3005
- Displacement: 532.6cc
- Shaft: Cylindrical shaft Ø40mm, parallel key A12x8x70 according to DIN 6885
- Flange: 4-hole 160.4 x 160.4 mm, Ø125 centring
- Ports: 3/4" BSP
- Genuine Danfoss reference: 151B3005
These engines are perfect for long periods of operation under tough conditions (e.g. high pressure, slow speed, very light oils, frequent switches) The tapered roller bearings allows the absorption of static and dynamic radial loads. The distribution disc with a balancing plate is drived by a separated cardan shaft and it minimizes the hydraulic and mechanical losses. As a result, the efficiency is considerable even under high pressures. Ports 3/4 BSP
Shaft diameter 40 mm
Max continuous inlet pressure 210 bar
Speed (rpm) | Torque (Nm) | ||||||||
Displacement (cm³) | max continuous | min | max continuous | start min | max continuous power (kW) | max continuous drop of pressure (bar) | max continuous oil flow (l/mn) | Sauer danfoss reference | Hydrokit reference |
161,1 | 625 | 10 | 470 | 340 | 26,5 | 200 | 100 | 151B3000 | MHT160A5 |
201,4 | 625 | 9 | 590 | 430 | 33,5 | 200 | 125 | 151B3001 | MHT200A5 |
251,8 | 500 | 8 | 730 | 530 | 33,5 | 200 | 125 | 151B3002 | MHT250A5 |
326,3 | 380 | 7 | 950 | 740 | 33,5 | 200 | 125 | 151B3003 | MHT315A5 |
410,9 | 305 | 6 | 1080 | 840 | 30 | 180 | 125 | 151B3004 | MHT400A5 |
532,6 | 240 | 5 | 1220 | 950 | 26,5 | 160 | 125 | 151B3005 | MHT500A5 |
161,1 | 625 | 10 | 470 | 340 | 26,5 | 200 | 100 | 151B3018 | MHT160C4 |
201,4 | 625 | 9 | 590 | 430 | 33,5 | 200 | 125 | 151B3019 | MHT200C4 |
Technical data
Motor type | OMT | ||
Displacement | 500 | cc/rev | |
Flange type | Flasque 4 trous - centrage Ø125mm | ||
Shaft type | Cylindrical | ||
Size of the shaft | 40 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G3/4 | ||
Taille du drain | G1/4 | ||
Bearing type | Roulement à rouleaux conique | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss |