Engine OMTW 250 Danfoss 151B3032 -
Hydrokit Part Number : MHTW250K2
Technical information
Tapered Shaft 45 mm 1/10 + nut M30x2
Flange 4 bolt Ø200 - centring Ø160
mm lateral port 3/4 BSP - Drain 1/4
BSP ref Danfoss 151B3032
Flange 4 bolt Ø200 - centring Ø160
mm lateral port 3/4 BSP - Drain 1/4
BSP ref Danfoss 151B3032
Technical data
| Motor type | OMTW |  |
|
| Displacement | 250 | cc/rev | |
| Flange type | Flasque 4 trous Roue - centrage Ø160mm |  |
|
| Shaft type | Tapered |  |
|
| Size of the shaft | 1/10 Ø45 | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G3/4 | ||
| Taille du drain | G1/4 | ||
| Bearing type | Roulement à rouleaux conique | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | Danfoss |  |