TIPPING KIT WITH MOTOR DRIVE
Hydrokit Part Number : CR0980LGMP
Technical information
Trailer tipping kit. (Not shaft driven.)
Uses tractor hydraulics 60l / min in continuous pumping
- Less oil transfer between tractors
- No oil mixture between tractor and tipping kit.
- High oil pressure on the trailer side (example 180 bar on the tractor side -> 220 bar on the trailer side)
- Large exportable oil capacity around 45 litres
Trailer side flow rate 37 l/min if tractor side 60 l/min.
Reservoir 80L - 620X450X300 mm
PTO shaft
Lowering control by cord
with pressure relief valve 250 BAR
Pump fitted with a turbo compressor
Hydraulic installation
Tractor side P and T G ½
Trailer side G 3/4
do not use the PTO output
Delivered with flexible, couplers, 60 L / min regulations on the tractor side
Uses tractor hydraulics 60l / min in continuous pumping
- Less oil transfer between tractors
- No oil mixture between tractor and tipping kit.
- High oil pressure on the trailer side (example 180 bar on the tractor side -> 220 bar on the trailer side)
- Large exportable oil capacity around 45 litres
Trailer side flow rate 37 l/min if tractor side 60 l/min.
Reservoir 80L - 620X450X300 mm
PTO shaft
Lowering control by cord
with pressure relief valve 250 BAR
Pump fitted with a turbo compressor
Hydraulic installation
Tractor side P and T G ½
Trailer side G 3/4
do not use the PTO output
Delivered with flexible, couplers, 60 L / min regulations on the tractor side
Technical data
| Power supply | Hydraulique | ||
| Type de commande de descente | Cordelette | ||
| Volume réservoir utile | 80 | L | |
| Débit maxi | 37 | l/min | |
| Max working pressure | 250 | bar | |
| Vitesse prise de force max | 0 | Tr/min | |
| Limiteur de pression | Oui |