OMPW X 200 SHAFT CYL Ø25MM
Hydrokit Part Number : MHPW200H1AX
Technical information
Semi-rapid Danfoss motor type OMPW X
Danfoss reference: 11186747
Displacement: 200 cc
wheel type flange 4 holes Ø 103 mm
Cylindrical shaft diameter 25 mm
Aligned side ports Ø G 1/2
Drain size: G 1/4
Standard dust cover seal
Maximum pressure on the shaft seal = 225 bar
Front bearing = Fluid bearing
Rear bearing = Fluid bearing
Integrated drainage valves
Key A8 x 7 x 32 mm (DIN 6885)
Danfoss reference: 11186747
Displacement: 200 cc
wheel type flange 4 holes Ø 103 mm
Cylindrical shaft diameter 25 mm
Aligned side ports Ø G 1/2
Drain size: G 1/4
Standard dust cover seal
Maximum pressure on the shaft seal = 225 bar
Front bearing = Fluid bearing
Rear bearing = Fluid bearing
Integrated drainage valves
Key A8 x 7 x 32 mm (DIN 6885)
Technical data
Motor type | OMPW | ||
Displacement | 200 | cc/rev | |
Flange type | Flasque 4 trous Roue | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | Side port - Aligned | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Needle bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |