DA SPOOL VALVE 2 WAYS 40LPM
Hydrokit Part Number : DM041A2M
Discontinued product replaced by :
MONO SPOOL VALVE 2 X D/A 50 LPM ( DM051A2M )
Technical information
MONOBLOC SPOOL VALVE
- Type of control: Manual
- Flow rate: 40lpm
- Pressure relief valve: Adjustable from 50 to 250bar
- Number of sections: 2
- Type of sections: A (double-acting spool valve A and B closed)
- Ports: 1/2" BSP (supply, carry over and reservoir return)
---------- 3/8" BSP (receiver supply)
- Configuration: Open centre, closed center or carry over
--------------------- Blank plug and spacer provided
- Type of control: Manual
- Flow rate: 40lpm
- Pressure relief valve: Adjustable from 50 to 250bar
- Number of sections: 2
- Type of sections: A (double-acting spool valve A and B closed)
- Ports: 1/2" BSP (supply, carry over and reservoir return)
---------- 3/8" BSP (receiver supply)
- Configuration: Open centre, closed center or carry over
--------------------- Blank plug and spacer provided
- Number of sections: 1 to 7.
- Max. flow: 40 l/min.
- Max. working pressure: 250 bar.
- Adjustable relief valve: from 50 to 250 bar.
- Ambient temperature: - 40 °C to +60 °C.
- Oil temperature: - 15 °C to 80 °C.
- Connecting threads:
- P1, P2, T1, T2, N = ½ BSP
- A and B = 3/8 BSP.
- Plugs on P2, T2 and N included.
Technical data
| Type of hydraulic circuit | Open center & Carry-over | ||
| Débit maxi | 40 | l/min | |
| Max working pressure | 250 | bar | |
| Nombre de section(s) | 2 | ||
| Type(s) Tiroir(s) | 2DE | ||
| Type of actuation | Commande Manuelle | ||
| Implantation orifice P | G1/2 | ||
| Implantation orifices A&B et/ou R | G3/8 | ||
| Implantation orifice T | G1/2 | ||
| Implantation orifice CS | G1/2 | ||
| Implantation Pilotage A&B | sans |