Technical information
MONOBLOC SPOOL VALVE
- Type of control: Manual
- Flow rate: 40lpm
- Pressure relief valve: adjustable from 50 to 250bar
- Number of section: 1
- Type of section: B (Single-acting spool valve)
- Type of detent: detent when lever pushed
- Ports: 1/2" BSP (supply, carry over and reservoir return)
---------- 3/8" BSP (receiver supply)
- Configuration: Open centre, closed center or carry over
--------------------- Blank plug and spacer provided
- Type of control: Manual
- Flow rate: 40lpm
- Pressure relief valve: adjustable from 50 to 250bar
- Number of section: 1
- Type of section: B (Single-acting spool valve)
- Type of detent: detent when lever pushed
- Ports: 1/2" BSP (supply, carry over and reservoir return)
---------- 3/8" BSP (receiver supply)
- Configuration: Open centre, closed center or carry over
--------------------- Blank plug and spacer provided
Technical data
| Type of hydraulic circuit | Open center & Carry-over | ||
| Débit maxi | 40 | l/min | |
| Max working pressure | 250 | bar | |
| Nombre de section(s) | 1 | ||
| Type(s) Tiroir(s) | 1SE cranté poussé | ||
| Type of actuation | Commande Manuelle | ||
| Implantation orifice P | G1/2 | ||
| Implantation orifices A&B et/ou R | G3/8 | ||
| Implantation orifice T | G1/2 | ||
| Implantation orifice CS | G1/2 | ||
| Implantation Pilotage A&B | sans |