Technical information
Electrically controlled hydraulic distribution kit
Allows you to control several functions in the cabin on equipment attached to a carrier.
Composition :
• 1 3-station base without pressure limiter
• 2 electro-distributors A & B closed to neutral
• 1 By-pass electro-distributor
• 1 control box with 5 m harness 2 functions
Voltage 12 VDC
Maximum flow: 80 l/min
Max pressure 200 Bar
3/4" BSP pressure ports
Return ports 1" BSP
Port A and B in 1/2" BSP
Allows you to control several functions in the cabin on equipment attached to a carrier.
Composition :
• 1 3-station base without pressure limiter
• 2 electro-distributors A & B closed to neutral
• 1 By-pass electro-distributor
• 1 control box with 5 m harness 2 functions
Voltage 12 VDC
Maximum flow: 80 l/min
Max pressure 200 Bar
3/4" BSP pressure ports
Return ports 1" BSP
Port A and B in 1/2" BSP
Technical data
| Type of hydraulic circuit | Open center | ||
| Débit maxi | 80 | l/min | |
| Max working pressure | 200 | bar | |
| Nombre de section(s) | 2 | ||
| Type(s) Tiroir(s) | 2DE + BP | ||
| Type of actuation | Commande Electrique 12vcc | ||
| Voltage | 12 VCC | Volt | |
| Implantation orifice P | G3/4 | ||
| Implantation orifices A&B et/ou R | G1/2 | ||
| Implantation orifice T | G1'' | ||
| Implantation orifice CS | sans | ||
| Boîtier Électrique | Avec |