DANFOSS OMP MEDIUM-SPEED MOTOR
Hydrokit Part Number : MHP200C1AD
Discontinued product replaced by :
MOTOR OMP X 200CC SHAFT 6 SP 1" ( MHP200ACAX )
Technical information
HYDRAULIC MEDIUM SPEED MOTOR
- Displacement: 194.6cc
- Flange SAE A, Ø82.55mm alignment, Ø106.4mm centre distance
- Shaft: 5-tooth splined, Ø25.3mm, straight-sided teeth, centring at base of teeth (SAE 6 B)
- Ports: 1/2 BSP" (A & B), 1/4" BSP (T)
- Geniune Danfoss reference: 151-0635 (replaces: 151-0335)
- Displacement: 194.6cc
- Flange SAE A, Ø82.55mm alignment, Ø106.4mm centre distance
- Shaft: 5-tooth splined, Ø25.3mm, straight-sided teeth, centring at base of teeth (SAE 6 B)
- Ports: 1/2 BSP" (A & B), 1/4" BSP (T)
- Geniune Danfoss reference: 151-0635 (replaces: 151-0335)
Technical data
Motor type | OMP Gerotor | ||
Displacement | 200 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Splined | ||
Size of the shaft | 6 dents PTO SAE6B Ø25.4 | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |