Additional info Splined shaft Ø32 mm Flange 4 boltrectangular - centring 82.5 mm refDanfoss 151-6008 Engine OMR 375 Danfoss 151-6008 - s MHRA375A34
Additional info DANFOSS OMP MEDIUM-SPEED MOTOR - Displacement: 155.7cc - Front flange: 2-hole, SAE A Ø82.55mm centring, 106.4mm centre distance - Shaft: Ø32mm cylindrical - Ports: 1/2" BSP (A & B) - Geniune Danfoss reference: 151-5005 DANFOSS OMP MEDIUM-SPEED MOTOR MHP160U3AD
Additional info SAE A flange - centering Ø82.5mm H6mm 6 tooth splined shaft White / Danfoss motor - 11199308 - 200200A6302BAAAA - RS1229060 MOTOR OMR 200CC 6 SPLINE SAE6B MHR200TCAW
Additional info MEDIUM SPEED MOTOR 400CM³ CYLINDRICAL SHAFT 32MM MEDIUM SPEED MOTOR 400CM³ MHS100A1AW
Additional info DANFOSS OMM MEDIUM-SPEED MOTOR - Displacement: 50.0cc - Flange: 3-hole, M6 - Shaft: Cylindrical Ø16mm, parallel key A5x5x16 - Ports: 3/8" BSP (A & B side), 1/8" BSP (T) - Danfoss part no.: 151G0013 DANFOSS OMM MEDIUM-SPEED MOTOR MHM50NAAD
Additional info Danfoss medium speed motor Danfoss reference number 11186652 Capacity : 315 cm3 Front flange 2 bolt SAE A. Centre ring 82.5mm. Cylindrical shaft diameter 25mm. Offset side ports 1/2" BSP. Standard dust seal. Max pressure on shaft seal = 225 bar. Front bearing : Fluid bearing. Rear Bearing : Fluid bearing. Integrated drainage valves. Key : 8 x 7 x 32mm (Din 6885.) MOTOR OMR X 315CC SHAFT 25 MM DIA MHR070A1BWC
