HYDR. MEDIUM SPEED MOTOR 125CC
Hydrokit Part Number : MHR125C1AD
Discontinued product replaced by :
MOTEUR OMRX 125CC 6DENTS SAE6B ( MHR125ACAX )
Technical information
HYDRAULIC MEDIUM SPEED MOTOR 125CC (125.7cm3)
SAE A front flange 82.55mm alignment 106.4mm centre distance
Splined shaft Ø25.3mm, straight-sided teeth, centring at base of teeth (SAE 6 B)
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Geniune Danfoss reference: 151-0723
SAE A front flange 82.55mm alignment 106.4mm centre distance
Splined shaft Ø25.3mm, straight-sided teeth, centring at base of teeth (SAE 6 B)
Ports: 1/2 BSP (A & B), 1/4 BSP (T)
Geniune Danfoss reference: 151-0723
Technical data
| Motor type | OMR Geroller |  |
|
| Displacement | 125 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Splined |  |
|
| Size of the shaft | 6 dents PTO SAE6B Ø25.4 | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |