Engine OMH 250 cm3 shaft ø32 mm
Hydrokit Part Number : MHH250A3
Technical information
Flange 4 rectangular bolt on a Ø106
mm centring Ø82.55 ref Danfoss 151H1003
mm centring Ø82.55 ref Danfoss 151H1003
Technical data
| Motor type | OMH |  |
|
| Displacement | 250 | cc/rev | |
| Flange type | Flasque 4 trous SAE A |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 32 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Bearing type | Journal bearing | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |