EATON MHR MEDIUM-SPEED MOTOR
Hydrokit Part Number : MHR100A1AE
Technical information
EATON MHR MEDIUM-SPEED MOTOR
- Displacement: 97.9cm3
- Flange: SAE A distance 106.4mm, Ø centring 82.55mm
- Shaft: Ø 25mm cylindrical, parallel key A8x7x32
- Ports: 1/2" BSP (inlet and oulet), 1/4" BSP (drain)
- Reinforced shaft seal and black painted
- Manufacturer: Eaton
- Performances (continuous / intermittent):
-- Max. Flow rate: 57 / 68lpm
-- Max. rotation speed: 554 / 665rpm
-- Pressure delta: 138 / 155bar
-- Torque: 216 / 241Nm
- Displacement: 97.9cm3
- Flange: SAE A distance 106.4mm, Ø centring 82.55mm
- Shaft: Ø 25mm cylindrical, parallel key A8x7x32
- Ports: 1/2" BSP (inlet and oulet), 1/4" BSP (drain)
- Reinforced shaft seal and black painted
- Manufacturer: Eaton
- Performances (continuous / intermittent):
-- Max. Flow rate: 57 / 68lpm
-- Max. rotation speed: 554 / 665rpm
-- Pressure delta: 138 / 155bar
-- Torque: 216 / 241Nm
Technical data
Motor type | OMR Geroller | ||
Displacement | 100 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Black RAL 9005 | ||
Marque | Danfoss (ex Eaton Charlynn) |