DANFOSS MEDIUM-SPEED MOTOR
Hydrokit Part Number : MHS160A3BD
Technical information
DANFOSS MEDIUM-SPEED MOTOR
- Displacement: 159.7cc
- Front flange: SAE, Ø82.55mm alignment, 106.4mm centre distance
- Shaft: Ø32mm cylindrical, parallel key A10x8x45 DIN6885
- Ports: 1/2" BSP (A & B) 1/4" BSP (T)
- Max. Pressure: 230 (inlet) 140bar (outlet)
- Geniune Danfoss reference: 151F0503
- Displacement: 159.7cc
- Front flange: SAE, Ø82.55mm alignment, 106.4mm centre distance
- Shaft: Ø32mm cylindrical, parallel key A10x8x45 DIN6885
- Ports: 1/2" BSP (A & B) 1/4" BSP (T)
- Max. Pressure: 230 (inlet) 140bar (outlet)
- Geniune Danfoss reference: 151F0503
These engines are perfect for long periods of operation under tough conditions (e.g. high pressure, slow speed, very light oils, frequent switches) The tapered roller bearings allows the absorption of static and dynamic radial loads. The distribution disc with a balancing plate is drived by a separated cardan shaft and it minimizes the hydraulic and mechanical losses. As a result, the efficiency is considerable even under high pressures.
Speed : max 600 to 810 RPM according to the engine
Cubic capacity : 80 to 400 cm³/rev
Ports 1/2 BSP
Shaft diameter 32 mm
Technical data
Motor type | OMS | ||
Displacement | 160 | cc/rev | |
Flange type | Flasque 4 trous - centrage Ø82.5mm | ||
Shaft type | Cylindrical | ||
Size of the shaft | 32 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Roulement à rouleaux conique | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |