OMP X MOTOR 315CC SHAFT CYL Ø25MM
Hydrokit Part Number : MHP315A1AX8
Technical information
Danfoss medium speed motor type OMP X
Danfoss reference: 11185707
Displacement: 315 cc
SAEA 2-hole flange - centering 82.5 mm
Cylindrical shaft diameter 25 mm
Rear ports Ø G 1/2
Drain Size: G 1/4
Standard dust seal
Maximum pressure on the shaft seal = 225 bar
Front bearing = Fluid bearing
Rear bearing = Fluid bearing
Integrated drain valves
Key A8 x 7 x 32 mm (DIN 6885)
Danfoss reference: 11185707
Displacement: 315 cc
SAEA 2-hole flange - centering 82.5 mm
Cylindrical shaft diameter 25 mm
Rear ports Ø G 1/2
Drain Size: G 1/4
Standard dust seal
Maximum pressure on the shaft seal = 225 bar
Front bearing = Fluid bearing
Rear bearing = Fluid bearing
Integrated drain valves
Key A8 x 7 x 32 mm (DIN 6885)
Technical data
Motor type | OMP Gerotor | ||
Displacement | 315 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | End port | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |