Single-acting balancing valve 3/4
Hydrokit Part Number : VS034TDNX1
Technical information
body. Maximum pressure: 350 bar.
" These valves are used to control the movement of cylinders and carry out a blocking in order to allow for the following functions: Characteristics Max. inlet flow rate Maximum pressure Pilot ratio V1, V2, C1, C2 L L1 L2 L3 L4 L5 L6 H S 95 l/min 350 bar 1:5.5 3/4G 127 mm 192 mm 46 mm 85 mm 23.5 mm 62.5 mm
- Controlled descent of the load: the load does not become a driving forcer, the balancing valve prevents the cylinder from cavitating.
- Limits the pressure in the cylinder during shocks created by an overload, pressure spikes created by the pumping forces (requires the use of an open centre distributor).
- Bichromate zinc-plated steel body.
- Factory setting: 320 bar.
- Setting of the valve to a minimum at 1.3 times the load pressure in order to allow for a quick closing.
Technical data
Type de valves d'équilibrage
Valves simples
Implantation
G3/4
Rapport
5.5/1
Max working pressure
350
bar
Matière
Steel
Option
Without option