HYDRAULIC GREASING PUMP
Hydrokit Part Number : P100H00CL
Technical information
HYDRAULIC GREASING PUMP
- Greasing hydraulically operated from the machine (displacement of a cylinder, etc.)
- Compatible with standard cartridge to screw
- Include EP7 pump with adjustable flow rate
- Suitable for 1 to 14 greasing points with standard control valve
- Pressure: 35 to 210bar
- Working pressure of the lubricant: 350bar
- Working température: -10 to 50°C
- Flow rate: 0.04 to 0.18cc (set by screw and counter-nut)
- Pump start-up pressure: 35bar (14bar on request by replacing the spring)
(the pressure has to drop below that threshold to launch a greasing cycle)
- Greasing hydraulically operated from the machine (displacement of a cylinder, etc.)
- Compatible with standard cartridge to screw
- Include EP7 pump with adjustable flow rate
- Suitable for 1 to 14 greasing points with standard control valve
- Pressure: 35 to 210bar
- Working pressure of the lubricant: 350bar
- Working température: -10 to 50°C
- Flow rate: 0.04 to 0.18cc (set by screw and counter-nut)
- Pump start-up pressure: 35bar (14bar on request by replacing the spring)
(the pressure has to drop below that threshold to launch a greasing cycle)
Advantages Lifespan extended: It keeps the machine greased. Time saved: Not required to proceed to greasing manually, it is automatically doneil est automatique.
Greasing improved: The greasing is only controlled hydraulically (single-acting) by small amount of grease.
Convenient: The replacement of the cartridge is easy.