"These valves are used to control the movement of cylinders and carry out a blocking in order to allow for the following functions:
- Controlled descent of the load: the load does not become a driving forcer, the balancing valve prevents the cylinder from cavitating.
- Limits the pressure in the cylinder during shocks created by an overload, pressure spikes created by the pumping forces (requires the use of an open centre distributor).
Characteristics
- Bichromate zinc-plated steel body.
- Factory setting: 320 bar.
- Setting of the valve to a minimum at 1.3 times the load pressure in order to allow for a quick closing.
Max. inlet flow rate | Maximum pressure | Pilot ratio | V1, V2, C1, C2 | L | L1 | L2 | L3 | L4 | L5 | L6 | H | S |
40 l/min | 350 bar | 1;4.5 | 3/8G | 100 mm | 149 mm | 30 mm | 60 mm | 20 mm | 50 mm | 55 mm
Type de valves d'équilibrage |
Valves simples |
|
|
Implantation |
G3/8 |
|
|
Rapport |
4.5/1 |
|
|
Max working pressure |
350 |
bar |
|
Matière |
Steel |
|
|
Option |
Without option |
|
|
|