Additional info ANTI-CAVITATION BLOCK - Suitable for OMP/OMR Danfoss motor (1/2" BSP - 4 screws) - Max. flow rate: 70lpm - Max. pressure: 210bar - Viscosity: 10/200cSt - Mountings: 1/2" BSP (D1, D2) - Dimensions (L x w x h): 95x70x35mm - Material: Alumunium ANTI-CAVITATION BLOCK FOR DANFOSS OMP/OMR MOTOR BACOMP1
Additional info DOUBLE PRESSURE RELIEF VALVE - Suitable for OMP and OMR flanged-mounted motors - Pressure adjustement: 10-200bar - Ports: 1/2" BSP DOUBLE PRESSURE RELIEF VALVE LPR2B
Additional info DOUBLE PRESSURE RELIEF VALVE - Type of motor: Flange mounted to suit OMP and OMR motors - Adjustment: 10 to 180bar - Flow rate: 60lpm - Mounting : 1/2" BSP - Provided without bolts DOUBLE PRESSURE RELIEF VALVE LPR2BB
Additional info FLOW REGULATOR VALVE FOR MOTOR DIRECT FACE MOUNT OMP OMR OMR FLOW REGULATOR VALVE FOR MOTOR RDR1
Additional info DOUBLE OVERCENTRE VALVE FOR OMP/OMR + BRAKE CONTROL steel DOUBLE OVERCENTRE VALVE (MOTOR) VDMHRCDSM1
Additional info DOUBLE-ACTING OVERCENTRE VALVE - Flange mounted on OMP / OMR motors - Mounting: 1/2" BSP and 1/4" BSP (brake control) - Max. flow rate: 60lpm - Max. pressure: 350bar - Pilot ratio: 4.25:1 OVER CENTER VALVE DOUBLE ACTIN VER2F
Additional info Flange mounted on motor type OMP/OMR. Max pressure: 315 Bar max inlet flow rate: 90 L/min max regulated flow rate: 50 / 55 L/min Coil: 15W - 12V dc +-10% PWM Max intensity: 1.25 A Frequency: 150 Hz Hysteresis: 8% FLOW RATE REGU BLOCK 3 WAY 12V DDP70501H1
Additional info Flange mounted on motor OMP/OMR. 50l/min - 210 bar. 200 mA - 150 hertz. Flow rate regulation block 3 channe DDP70502H1
Additional info OMP/OMR BY-PASS BLOCK 40 L/MN 210B Normally closed 12VDC BY-PASS BLOCK OMP/OMR 40 LPM 210B 72010543
Additional info DOUBLE-ACTING OVERCENTRE VALVE - Flange mounted on OMP / OMR motors - Mounting: 1/2" BSP and 1/4" BSP (brake control) - Max. flow rate: 60lpm - Max. pressure: 350bar - Pilot ratio: 4.25:1 DOUBLE-ACTING OVERCENTRE VALVE VDMHRCDSL1
