Engine OMR 250 Danfoss 151-0726 - s
Hydrokit Part Number : MHR275UCAD
Technical information
Splined shaft 6 teeth SAE 6B (Ø25.3 mm) Flange 2
holes SAE A - centring 82.5 mm lateral orifice
1/2G ref Danfoss 151-0726
holes SAE A - centring 82.5 mm lateral orifice
1/2G ref Danfoss 151-0726
Technical data
| Motor type | OMR Geroller |  |
|
| Displacement | 275 | cc/rev | |
| Flange type | Flasque 4 trous SAE A |  |
|
| Shaft type | Splined |  |
|
| Size of the shaft | 6 dents PTO SAE6B Ø25.4 | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |