PROP FLOW DIVIDER 3 PORTS P L
Hydrokit Part Number : DDPA0251HAS3D1GLP
Technical information
3-way proportional flow divider with pressure limiter (180bar)
Maximum flow: 100 L/min
Regulated flow: 0-25L/min
Voltage: 12VDC
Ports: P = G3/4 (fitted with G1/2 reduction) A&R = G1/2
Connector: DIN Hirschmann (IP54)
Non-return valve between A and P: yes
Maximum pressure: 315 bar
Seals: Viton (FPM)
Command: reel + emergency pin
Coil power: 21W at 12V and Imax = 2.3A
Frequency: 100Hz
Leakage: maximum 100 cm3/min at 100bar
Minimum pressure difference (pressure balance): 7 bar
Temperature range: -20 to +80°C
Viscosity range: 10 to 300 mm²/s
Maximum permissible pollution degree of the hydraulic fluid: DIN 4406 class 20/18/15
Mounting position: optional, preferably solenoid down (self-bleeding)
Bucher reference: SRRB025S3G-0G12-RP P180
Maximum flow: 100 L/min
Regulated flow: 0-25L/min
Voltage: 12VDC
Ports: P = G3/4 (fitted with G1/2 reduction) A&R = G1/2
Connector: DIN Hirschmann (IP54)
Non-return valve between A and P: yes
Maximum pressure: 315 bar
Seals: Viton (FPM)
Command: reel + emergency pin
Coil power: 21W at 12V and Imax = 2.3A
Frequency: 100Hz
Leakage: maximum 100 cm3/min at 100bar
Minimum pressure difference (pressure balance): 7 bar
Temperature range: -20 to +80°C
Viscosity range: 10 to 300 mm²/s
Maximum permissible pollution degree of the hydraulic fluid: DIN 4406 class 20/18/15
Mounting position: optional, preferably solenoid down (self-bleeding)
Bucher reference: SRRB025S3G-0G12-RP P180
Technical data
| Voltage | 12 VCC | Volt | |
| Débit maxi | 100 | l/min | |
| Type of flow regulation | Proportionnelle PWM 0 - 25 L/min | ||
| Max working pressure | 315 | bar | |
| Limiteur de pression | Oui | ||
| Implantation orifice P | G3/4 | ||
| Implantation orifices A&B et/ou R | G1/2 | ||
| Connector type | Pinch Hirschmann DIN 43650 |  |
|
| Option | Avec clapet anti-retour | ||
| Control Type | Sans |