DOUBLE BYPASS FLOW DIVIDER 100 LPM 12VDC
Hydrokit Part Number : DDBB0A51C0
Technical information
DOUBLE BYPASS FLOW DIVIDER 100 LPM
- Max. flow rate at inlet: 2 x 100lpm
- Controlled flow at outlet: 20 to 150lpm
- Outlet pressure: 10 to 350bar
- Mounting: 1/2" BSP (P1, P2, B1 & P2) 3/4" BSP (P) 1/4" BSP (T)
- Voltage: 12Vdc
- Warning: has to operate above 2 x 40lpm
- Max. flow rate at inlet: 2 x 100lpm
- Controlled flow at outlet: 20 to 150lpm
- Outlet pressure: 10 to 350bar
- Mounting: 1/2" BSP (P1, P2, B1 & P2) 3/4" BSP (P) 1/4" BSP (T)
- Voltage: 12Vdc
- Warning: has to operate above 2 x 40lpm
Divider by pass with electric control (special for hydraulic excavator.)
Very compact divider for the supply of a grinder, a hammer, etc. P = tool
Use of every function of the excavator: the divider allows to take away an equal flow on each pump to supply a tool.
The double flow divider is settled between the pumps and the orignal valves of the excavator.
E1 E2 =pump aperture
B1 B2 = throught the original valve
T = receiver
réglage pression: pressure adjustment
réglage débit: flow adjustment
Max entering flow ( l/mn ) |
Max pressure ( bar ) |
Regulated output flow (l/mn ) |
Regulated output max pressure ( bar ) |
Aperture |
Voltage ( volts ) |
Reference | ||
E1, E2 |
E1, E2 |
P |
E1, E2, B1, B2 |
P |
T |
|||
2 x 100 |
350 |
150 |
10 to 350 |
1/2 BSP |
3/4 BSP |
1/4 |
12 |
DDBB0A51C0 |
2 x 100 |
350 |
150 |
10 to 350 |
1/2 BSP |
3/4 BSP |
1/4 |
24 |
DDBB0A52C0 |