MOTOR OMR X 200CC CYL Ø25MM
Hydrokit Part Number : MHR200A1AX8
Technical information
Semi-rapid Danfoss motor type OMR X
Danfoss reference: 11186642
Displacement: 200 cc
SAEA 2-hole flange - 82.5 mm centering
Cylindrical shaft diameter 25 mm
Rear ports Ø G 1/2
Drain size: G 1/4
Standard dust cover seal
Maximum pressure on the shaft seal = 225 bar
Front bearing = Fluid bearing
Rear bearing = Fluid bearing
Integrated drainage valves
Key A8 x 7 x 32 mm (DIN 6885)
Danfoss reference: 11186642
Displacement: 200 cc
SAEA 2-hole flange - 82.5 mm centering
Cylindrical shaft diameter 25 mm
Rear ports Ø G 1/2
Drain size: G 1/4
Standard dust cover seal
Maximum pressure on the shaft seal = 225 bar
Front bearing = Fluid bearing
Rear bearing = Fluid bearing
Integrated drainage valves
Key A8 x 7 x 32 mm (DIN 6885)
Technical data
Motor type | OMR Geroller | ||
Displacement | 200 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | End port | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |