MOTOR OMR 50CC SHAFT 25 MM DIA
Hydrokit Part Number : MHS200UDAW
Technical information
White Danfoss WR 255 semi-fast motor
Capacity: 50 cc
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm centre distance
25 mm diameter cylindrical shaft
Offset side holes Ø BSP ½
Drain hole Ø BSP 1/4
Black paint
continuous :
- Maximum flow: 53L / Min - Maximum speed 1058 rpm
- Delta pressure: 155 bar
- Torque: 111 N.m
Intermittent:
- Max Flow: 61L / Min - Max Speed 1220rpm
- Delta pressure: 207 bar
- Torque: 149 N.m
Danfoss: 11200495 - 11199537 - 255050A6312BAAAA
Capacity: 50 cc
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm centre distance
25 mm diameter cylindrical shaft
Offset side holes Ø BSP ½
Drain hole Ø BSP 1/4
Black paint
continuous :
- Maximum flow: 53L / Min - Maximum speed 1058 rpm
- Delta pressure: 155 bar
- Torque: 111 N.m
Intermittent:
- Max Flow: 61L / Min - Max Speed 1220rpm
- Delta pressure: 207 bar
- Torque: 149 N.m
Danfoss: 11200495 - 11199537 - 255050A6312BAAAA
Technical data
| Motor type | OMS |  |
|
| Displacement | 200 | cc/rev | |
| Flange type | Flasque 4 trous SAE A |  |
|
| Shaft type | Splined |  |
|
| Size of the shaft | 14 dents Ø31.75mm | ||
| Orifices position | Side port - Aligned |  |
|
| Orifices A & B size | G1/2 | ||
| Bearing type | Needle bearing | ||
| Speed sensor | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Danfoss / White WDMS |  |