MEDIUM-SPEED MOTOR 200CM³ SHAFT 25M
Hydrokit Part Number : MHR200A1AD
Discontinued product replaced by :
MOTOR OMR X 200CC SHAFT CYL 25MM ( MHR200A1AX )
Technical information
DANFOSS OMR MEDIUM-SPEED MOTOR
- Displacement: 200CC (199.8cm3)
- Flange: SAE A distance 106.4mm, Ø centring 82.55mm
- Shaft: Ø 25mm cylindrical, parallel key A8x7x32
- Ports: 1/2" BSP (inlet and oulet), 1/4" BSP (drain)
- Geniune Danfoss reference: 151-0715
- Displacement: 200CC (199.8cm3)
- Flange: SAE A distance 106.4mm, Ø centring 82.55mm
- Shaft: Ø 25mm cylindrical, parallel key A8x7x32
- Ports: 1/2" BSP (inlet and oulet), 1/4" BSP (drain)
- Geniune Danfoss reference: 151-0715
The frictions are reduced to the minimum thanks to the gear rim bearing and to the effectiveness of the hydraulic greasing. It permits a long life and a better efficiency even under continuous high pressures. The gear rim with rollers is advised with very light oils and for systems that require numerous switches.
Speed : max 160 to 775 RPM according to the engine
Cubic capacity : 50 to 375 cm³/rev
|
Speed (rpm) |
Torque (Nm) |
||||||||||
|
Displacement (cm³) |
max continuous |
min |
max continuous |
start min |
max continuous power (kW) |
max continuous pressure drop (bar) |
max continuous oil flow (l/mn) |
max starting pressure (bar) |
max continuous inlet pressure (bar) |
Sauer Danfoss reference |
Hydrokit reference |
|
51,6 |
775 |
10 |
100 |
80 |
7 |
140 |
40 |
10 |
175 |
151.0710 |
MHR050A1AD |
|
80,3 |
750 |
10 |
195 |
150 |
12,5 |
175 |
60 |
10 |
175 |
151.0711 |
MHR080A1AD |
|
99,8 |
600 |
10 |
240 |
200 |
13 |
175 |
60 |
10 |
175 |
151.0712 |
MHR100A1AD |
|
125,7 |
175 |
9 |
300 |
250 |
12,5 |
175 |
60 |
9 |
175 |
151.0713 |
MHR125A1AD |
|
159,6 |
375 |
7 |
300 |
240 |
10 |
130 |
60 |
7 |
175 |
151.0714 |
MHR160A1AD |
|
199,8 |
300 |
5 |
300 |
260 |
8 |
110 |
60 |
5 |
175 |
151.0715 |
MHR200A1AD |
|
249,3 |
240 |
5 |
300 |
240 |
6 |
80 |
60 |
5 |
175 |
151.0716 |
MHR250A1AD |
|
315,7 |
190 |
5 |
300 |
260 |
5 |
70 |
60 |
5 |
175 |
151.0717 |
MHR315A1AD |
|
372,6 |
160 |
5 |
300 |
240 |
4 |
55 |
60 |
5 |
175 |
151.0718 |
MHR375A1AD |
Technical data
| Motor type | OMR Geroller |  |
|
| Displacement | 200 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |