Motor WP 388cc shaft Ø25mm
Hydrokit Part Number : MHP400A1AW
Technical information
White Danfoss WP 155 Medium-speed motor
Capacity: 388 ccm
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm center distance
25 mm diameter cylindrical shaft
Offset side holes Ø G ½
Drain hole Ø G 1/4
Black paint
continuous :
- Maximum flow: 60 L / Min - Maximum speed 155 rpm
- Delta pressure: 95 bar
- Torque: 488 N.m
Intermittent:
- Max flow: 75L / Min - Max speed 189 rpm
- Delta pressure: 125 bar
- Torque: 625 N.m
Danfoss : 11200472 - 11199521 - 155400A6312BAAAA
Capacity: 388 ccm
SAEA 2-hole flange - 82.5 mm centering - 2-hole 106.4 mm center distance
25 mm diameter cylindrical shaft
Offset side holes Ø G ½
Drain hole Ø G 1/4
Black paint
continuous :
- Maximum flow: 60 L / Min - Maximum speed 155 rpm
- Delta pressure: 95 bar
- Torque: 488 N.m
Intermittent:
- Max flow: 75L / Min - Max speed 189 rpm
- Delta pressure: 125 bar
- Torque: 625 N.m
Danfoss : 11200472 - 11199521 - 155400A6312BAAAA
Technical data
| Motor type | WP |  |
|
| Displacement | 388 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Impro Fluidtek |  |