MOTOR OMR X 315CC SHAFT 25 MM DIA
Hydrokit Part Number : MHR315A1AX
Technical information
Danfoss medium speed motor
Danfoss reference number 11186652
Capacity : 315 cm3
Front flange 2 bolt SAE A. Centre ring 82.5mm.
Cylindrical shaft diameter 25mm.
Offset side ports 1/2" BSP.
Standard dust seal.
Max pressure on shaft seal = 225 bar.
Front bearing : Fluid bearing.
Rear Bearing : Fluid bearing.
Integrated drainage valves.
Key : 8 x 7 x 32mm (Din 6885.)
Danfoss reference number 11186652
Capacity : 315 cm3
Front flange 2 bolt SAE A. Centre ring 82.5mm.
Cylindrical shaft diameter 25mm.
Offset side ports 1/2" BSP.
Standard dust seal.
Max pressure on shaft seal = 225 bar.
Front bearing : Fluid bearing.
Rear Bearing : Fluid bearing.
Integrated drainage valves.
Key : 8 x 7 x 32mm (Din 6885.)
Technical data
Motor type | OMR Geroller | ||
Displacement | 315 | cc/rev | |
Flange type | SAE A flange | ||
Shaft type | Cylindrical | ||
Size of the shaft | 25 mm | ||
Orifices position | Side port - Offset | ||
Orifices A & B size | G1/2 | ||
Taille du drain | G1/4 | ||
Shaft seal | Int. in shaft seal 225 bar | ||
Bearing type | Journal bearing | ||
Speed sensor | No | ||
Paint | Not paint | ||
Marque | Danfoss / White WDMS |