PROP FLOW DIVIDER 3 PORT 12V
Hydrokit Part Number : DDPA0501D1
Technical information
KIT 3-way proportional flow divider + Control box 1 PWM output with 8m beam
Maximum flow: 100 L / min
Regulated flow: 0-50L / min
Voltage: 12VDC
Ports: P = G3 / 4 A&R = G1 / 2
Connector: DIN Hirschmann (IP54)
Non-return valve between A and P: yes
Max pressure: 315 bar
Seals: Viton (FPM)
Command: spool + emergency override
Coil power: 21W at 12V and Imax = 2.3A
Frequency: 100 Hz
Leakage: maximum 100 cm3 / min at 100bar
Minimum pressure difference (pressure balance): 7 bar
Temperature range: -20 to +80 ° C
Viscosity range: 10 to 300 mm² / s
Maximum permissible degree of pollution of the hydraulic fluid: DIN 4406 class 20/18/15
Installation position: optional; preferably, electromagnet downwards (auto purge)
Maximum flow: 100 L / min
Regulated flow: 0-50L / min
Voltage: 12VDC
Ports: P = G3 / 4 A&R = G1 / 2
Connector: DIN Hirschmann (IP54)
Non-return valve between A and P: yes
Max pressure: 315 bar
Seals: Viton (FPM)
Command: spool + emergency override
Coil power: 21W at 12V and Imax = 2.3A
Frequency: 100 Hz
Leakage: maximum 100 cm3 / min at 100bar
Minimum pressure difference (pressure balance): 7 bar
Temperature range: -20 to +80 ° C
Viscosity range: 10 to 300 mm² / s
Maximum permissible degree of pollution of the hydraulic fluid: DIN 4406 class 20/18/15
Installation position: optional; preferably, electromagnet downwards (auto purge)
Technical data
| Voltage | 12 VCC | Volt | |
| Débit maxi | 100 | l/min | |
| Type of flow regulation | Proportionnelle PWM 0 - 50 L/min | ||
| Max working pressure | 315 | bar | |
| Limiteur de pression | Non | ||
| Implantation orifice P | G3/4 | ||
| Implantation orifices A&B et/ou R | G1/2 | ||
| Connector type | Pinch Hirschmann DIN 43650 |  |
|
| Option | Avec clapet anti-retour | ||
| Boîtier Électrique | Avec |