Semi-rapid engine Danfoss 151B3021
Hydrokit Part Number : MHT315C4
Technical information
max speed: 380 rpm (125 L/min) - max
pressure drop: 200 bar - continuous
max torque: 950 Nm - min. torque at
start-up: 740 Nm - continuous max power:
33.5 Kw
"Semi-rapid engine Danfoss OMT.
All of these engines are indicated for prolonged operation in harsh conditions (high pressure, slow speed, very fluid oils and frequent inversions for example). Their tapered roller bearings make it possible to absorb dynamic and static radial loads. Driven by a small separate cardan shaft, the distribution disc with balancing plate minimises hydraulic and mechanical losses. Result: substantial output even under high pressure.
Orifices 3/4 BSP.
PTO shaft 1’’3/8.
Max. continuous inlet pressure: 210 bar.
Max. continuous return pressure: 140 bar.
Technical data
Motor type
OMT
Displacement
315
cc/rev
Flange type
Flasque 4 trous - centrage Ø125mm
Shaft type
Splined
Size of the shaft
6 dents PTO Ø34.85
Orifices position
Side port - Offset
Orifices A & B size
G3/4
Taille du drain
G1/4
Bearing type
Roulement à rouleaux conique
Speed sensor
No
Paint
Not paint
Marque
Danfoss