MOTOR DANFOSS REAR PORTS
Hydrokit Part Number : MHP200A1AZD
Technical information
SAE A - Shaft Ø25mm
Rear outlet G 1/2 + anti-shock 80bar
ref Danfoss 151-5250 - OMP200
Rear outlet G 1/2 + anti-shock 80bar
ref Danfoss 151-5250 - OMP200
Technical data
| Motor type | OMP Gerotor |  |
|
| Displacement | 200 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | End port |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | 9/16-18UNF | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Not paint | ||
| Marque | Danfoss / White WDMS |  |