MOTOR OMR 129CC SHAFT 25 MM DIA
Hydrokit Part Number : MHR130A1AW
Technical information
White Danfoss type WR 255 semi-rapid motor
Displacement: 129 cc
SAEA 2-hole flange - 82.5 mm centering - 106.4mm 2-hole center distance
Cylindrical shaft diameter 25 mm
Offset side ports Ø G ½
Drain port Ø G 1/4
Black paint
continuous :
- Maximum flow: 61L / Min - Maximum speed 472 tr / min
- Delta pressure: 172 bar
- Torque: 316 N.m
Intermittent:
- Max flow: 76L / Min - Max speed 588 rpm
- Pressure delta: 207 bar
- Torque: 375 N.m
Danfoss: 11200509 -11199583 - 255130A6312BAAAA
Displacement: 129 cc
SAEA 2-hole flange - 82.5 mm centering - 106.4mm 2-hole center distance
Cylindrical shaft diameter 25 mm
Offset side ports Ø G ½
Drain port Ø G 1/4
Black paint
continuous :
- Maximum flow: 61L / Min - Maximum speed 472 tr / min
- Delta pressure: 172 bar
- Torque: 316 N.m
Intermittent:
- Max flow: 76L / Min - Max speed 588 rpm
- Pressure delta: 207 bar
- Torque: 375 N.m
Danfoss: 11200509 -11199583 - 255130A6312BAAAA
Technical data
| Motor type | WR |  |
|
| Displacement | 129 | cc/rev | |
| Flange type | SAE A flange |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 25 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Impro Fluidtek |  |