MOTOR WHITE 100CC Ø32MM SHAFT
Hydrokit Part Number : MHR100C3AW
Technical information
Displacement: 100 cm3 / REV
Cylindrical shaft Ø32mm
4-hole flange on Ø106mm - Centering Ø82.5mm
Side holes G1/2 + installation surface
Danfoss White Roller Stator 280100AG321BAAAA - 11199853 - 11200541
Cylindrical shaft Ø32mm
4-hole flange on Ø106mm - Centering Ø82.5mm
Side holes G1/2 + installation surface
Danfoss White Roller Stator 280100AG321BAAAA - 11199853 - 11200541
Technical data
| Motor type | WG |  |
|
| Displacement | 100 | cc/rev | |
| Flange type | Flasque 4 trous - centrage Ø82.5mm |  |
|
| Shaft type | Cylindrical |  |
|
| Size of the shaft | 32 mm | ||
| Orifices position | Side port - Offset |  |
|
| Orifices A & B size | G1/2 | ||
| Taille du drain | G1/4 | ||
| Shaft seal | Int. in shaft seal 225 bar | ||
| Bearing type | Journal bearing | ||
| Speed sensor (predisposition) | No | ||
| Paint | Black RAL 9005 | ||
| Marque | Impro Fluidtek |  |